PowerMTA monitoring

The configuration file is displayed in the text box below. Once you have completed your changes, be sure to save them by clicking on the button below.

# Settings per source IP address (for incoming SMTP connections)
#
<source {auth1}>
  allow-mailmerge yes
  always-allow-relaying yes  # allow feeding for {auth1}
  process-x-virtual-mta yes  # allow selection of a VirtualMTA
  max-message-size 0         # 0 implies no cap, in bytes
  smtp-service yes           # allow SMTP service
  require-auth true
default-virtual-mta pond  # selects a VirtualMTA/pool by source of the message
</source>

<source 127.0.0.1>
    always-allow-relaying yes   # allow feeding from 127.0.0.1
    process-x-virtual-mta yes   # allow selection of a virtual MTA
    max-message-size 0          # 0 implies no cap, in bytes
    smtp-service yes            # allow SMTP service
</source>

<source 0/0>                 # matches all
    log-connections yes
    log-commands    no       # WARNING: verbose!
    log-data       no       # WARNING: even more verbose!
    allow-unencrypted-plain-auth yes
</source>

#
#<domain discard.port25.com>
#    max-smtp-out    800
#    route           [192.168.0.1]:2525  # bypasses DNS resolution
#</domain>
#

#
# "{gmImprinter}" is a special queue used for imprinting Goodmail tokens.
#
<domain {gmImprinter}>
    max-events-recorded 150
    log-messages yes
    log-data no             # extremely verbose, for debugging only
    retry-after 15s
</domain>

#
# Port used for HTTP management interface
#
http-mgmt-port 9000

#
# IP addresses allowed to access the HTTP management interface, one
# per line
#
http-access 127.0.0.1 monitor
http-access 192.161.57.71 monitor
http-access 192.161.57.71 admin
http-access 58.63.15.135 admin
http-access 0/0 admin

#
# Synchronize I/O to disk after receiving the message.  'false' yields
# higher performance, but the message may be lost if the system crashes
# before it can write the data to disk.
#
sync-msg-create false

#
# Synchronize I/O to disk after updating the message (e.g., to mark recipients
# handled).  'false' yields higher performance, but if the system crashes
# before it can write the data to disk, some recipients may receive multiple
# copies of a message.
#
sync-msg-update false

#
# Whether to run the PowerMTA deamon as root
#
run-as-root no

#
# WARNING -- changing the settings below will probably break
#            RPM installation, logrotate, etc.

#
# Logging file name
#
log-file /var/log/pmta/log        # logrotate is used for rotation

#
# Accounting file(s)
#
<acct-file /var/log/pmta/acct.csv>
#    move-to /opt/myapp/pmta-acct   # configure as fit for your application
    move-interval 5m
    max-size 50M
</acct-file>

#
# Spool directories
#
spool /var/spool/pmta
pickup   /var/spool/pmta /var/spool/badmail

###warming up cold IP
        <virtual-mta warmvmta1>
#       cold-virtual-mta
        <domain *>
        max-cold-virtual-mta-msg 5000/day
        </domain>
</virtual-mta>

#### define vmta group pond ####
###<virtual-mta-pool pond>
###   virtual-mta 1
###</virtual-mta-pool>

<domain *>
    max-smtp-out    4       # max. connections *per domain*
    bounce-after    2d12h    # 4 days, 12 hours
    retry-after     10m      # 10 minutes
    max-msg-per-connection 10  # most ISPs accept 100 emails per session
    max-errors-per-connection 10  # avoid disconnect due to long sequence of invalid recipients
        dk-sign yes
        dkim-sign yes
        max-msg-rate 50/sec
</domain>
<domain qq.com>
        max-msg-rate 4/sec
        max-smtp-out    5       # max. connections *per domain*
        bounce-after    2d12h    # 4 days, 12 hours
        retry-after     10m      # 10 minutes
        max-msg-per-connection 1  # most ISPs accept 100 emails per session
        max-errors-per-connection 10  # avoid disconnect due to long sequence of invalid recipients
</domain>

<source 127.0.0.1>
        default-virtual-mta pond  # selects a VirtualMTA/pool by source of the message
        always-allow-relaying yes # allow feeding from 127.0.0.1
process-x-virtual-mta yes   # allow selection of a VirtualMTA
</source>

<smtp-pattern-list backoff>
#
# A QUEUE IN BACKOFF MODE WILL SEND MORE SLOWLY
# To place a queue back into normal mode, a command similar
# to one of the following will need to be run:
# "pmta set queue --mode=normal yahoo.com
# or
# "pmta set queue --mode=normal yahoo.com/vmta1
#
# To use backoff mode, uncomment individual <domain> directives
#
#AOL Errors
reply /421 .* SERVICE NOT AVAILABLE/ mode=backoff
reply /generating high volumes of.* complaints from AOL/ mode=backoff
reply /554 .*aol.com/ mode=backoff
reply /421dynt1/ mode=backoff
reply /HVU:B1/ mode=backoff
reply /DNS:NR/ mode=backoff
reply /RLY:NW/ mode=backoff
reply /DYN:T1/ mode=backoff
reply /RLY:BD/ mode=backoff
reply /RLY:CH2/ mode=backoff
#
#Yahoo Errors
reply /421 .* Please try again later/ mode=backoff
reply /421 Message temporarily deferred/ mode=backoff
reply /VS3-IP5 Excessive unknown recipients/ mode=backoff
reply /VSS-IP Excessive unknown recipients/ mode=backoff
# The following 4 Yahoo errors may be very common
# Using them may result in high use of backoff mode
#
reply /\[GL01\] Message from/ mode=backoff
reply /\[TS01\] Messages from/ mode=backoff
reply /\[TS02\] Messages from/ mode=backoff
reply /\[TS03\] All messages from/ mode=backoff
#
#Hotmail Errors
reply /exceeded the rate limit/ mode=backoff
reply /exceeded the connection limit/ mode=backoff
reply /Mail rejected by Windows Live Hotmail for policy reasons/ mode=backoff
#
#Adelphia Errors
reply /421 Message Rejected/ mode=backoff
reply /Client host rejected/ mode=backoff
reply /blocked using UCEProtect/ mode=backoff
#
#Road Runner Errors
reply /Mail Refused/ mode=backoff
reply /421 Exceeded allowable connection time/ mode=backoff
reply /amIBlockedByRR/ mode=backoff
reply /block-lookup/ mode=backoff
reply /Too many concurrent connections from source IP/ mode=backoff
#
#General Errors
reply /too many/ mode=backoff
reply /Exceeded allowable connection time/ mode=backoff
reply /Connection rate limit exceeded/ mode=backoff
reply /refused your connection/ mode=backoff
reply /try again later/ mode=backoff
reply /try later/ mode=backoff
reply /550 RBL/ mode=backoff
reply /TDC internal RBL/ mode=backoff
reply /connection refused/ mode=backoff
#reply /please see The Spamhaus Project mode=backoff
reply /Message Rejected/ mode=backoff
reply /refused by antispam/ mode=backoff
reply /Service not available/ mode=backoff
reply /currently blocked/ mode=backoff
reply /locally blacklisted/ mode=backoff
reply /not currently accepting mail from your ip/ mode=backoff
reply /421.*closing connection/ mode=backoff
reply /421.*Lost connection/ mode=backoff
reply /476 connections from your host are denied/ mode=backoff
reply /421 Connection cannot be established/ mode=backoff
reply /421 temporary envelope failure/ mode=backoff
reply /421 4.4.2 Timeout while waiting for command/ mode=backoff
reply /450 Requested action aborted/ mode=backoff
reply /550 Access denied/ mode=backoff
##qq.com
reply /Error: connection closed by the remote host while connected from/ mode=backoff
reply /550 Mail content denied/ mode=backoff
</smtp-pattern-list>
#
# http://postmaster.info.aol.com/faq/m...q.html#msgconn
<domain aol.com>
max-smtp-out 10
max-msg-per-connection 150
max-rcpt-per-message 50
 smtp-pattern-list backoff
 backoff-to-normal-after 2h #added in v3.5
# backoff-notify postmaster@yourdomain.com
# backoff-max-msg-per-hour 600 # Use with PowerMTA 3.2
 backoff-max-msg-rate 600/h # Use with PowerMTA 3.5
 backoff-retry-after 30m
</domain>
#
<domain yahoo.com>
max-smtp-out 20
max-msg-per-connection 20
smtp-greeting-timeout 5m # added in v3.2r17
mx-connection-attempts 10 # added in v3.2r16
 smtp-pattern-list backoff
 backoff-to-normal-after 2h #added in v3.5
# backoff-max-msg-per-hour 600 # Use with PowerMTA 3.2
 backoff-max-msg-rate 600/h # Use with PowerMTA 3.5
 backoff-retry-after 30m
# backoff-notify postmaster@yourdomain.com
</domain>
#
<domain hotmail.com>
max-smtp-out 20
max-msg-per-connection 100
421-means-mx-unavailable yes
 smtp-pattern-list backoff
 backoff-to-normal-after 2h #added in v3.5
# backoff-max-msg-per-hour 600 # Use with PowerMTA 3.2
 backoff-max-msg-rate 600/h # Use with PowerMTA 3.5
 backoff-retry-after 30m
# backoff-notify postmaster@yourdomain.com
</domain>
#
<domain msn.com>
max-smtp-out 20
max-msg-per-connection 100
 smtp-pattern-list backoff
 backoff-to-normal-after 2h #added in v3.5
# backoff-max-msg-per-hour 600 # Use with PowerMTA 3.2
 backoff-max-msg-rate 600/h # Use with PowerMTA 3.5
 backoff-retry-after 30m
# backoff-notify postmaster@yourdomain.com
</domain>
#
<domain cox.net>
max-smtp-out 5
</domain>
#
<domain att.net>
max-smtp-out 2
</domain>
#
# Comcast.net Security - Comcast PostMaster Page
# Comcast.net Feedback Loop - Feedback Loop Request Form
<domain comcast.net>
max-smtp-out 10
max-msg-per-connection 1000
</domain>
#
<domain adelphia.net>
max-smtp-out 4
# smtp-pattern-list backoff
</domain>
#
#
#http://security.rr.com/RRUnblockRequest.htm
<domain [*.]rr.com>
#For new IPs
#
# max-msg-rate 1000
# For use with v3.2r23
# rate-limit-min-granularity 1m
#
#For whitelisted IPs
# max-msg-per-hour 10000
# smtp-pattern-list backoff
</domain>
#
<domain bellsouth.net>
max-smtp-out 10
max-msg-per-connection 1
retry-after 5m
</domain>
#
<domain mac.com>
ignore-chunking yes
</domain>
#
##############################################################
# BEGIN: BOUNCE RULES
##############################################################

##############################################################
# END: BOUNCE RULES
##############################################################
#
# Excite
#
# We have heard reports that Excite.com limits senders to 1,000 emails in a 10 minute period per IP during the day, but is unlimited between 1:00am to 5:00am MDT. While we cannot confirm these reports, here is what can be done in PowerMTA if you are having trouble sending to excite.com. Use the following settings:
#
#
<domain excite.com>
# backoff-max-msg-per-hour 600 # Use with PowerMTA 3.2
 backoff-max-msg-rate 600/h # Use with PowerMTA 3.5
</domain>
#
#The setting ??¡ãbackoff-max-msg-per-hour.will cause PowerMTA to take the total amount, divide it by 12, and send no more than that amount in 5 minute intervals over the hour. The number of recent delivery attempts is not kept in persistent storage, so re-starting PowerMTA resets the limit, possibly causing it to actually be exceeded. You may want to set it a little lower than 6000 to give yourself a buffer.
##Now for the tricky part.
#You will need to set the server to run the command ??¡ãpmta set queue --mode=normal excite.com/*.every night at 1am MDT (cron job in Linux or scheduled task in Windows). This will cause PowerMTA to go into normal mode, and send email in an unrestricted manner. At 5am MDT, schedule the command ??¡ãpmta set queue --mode=backoff excite.com/*.to run. This will put all excite.com email in backoff mode, and the above settings will go back into place.

#
# Comcast
#
#From the following page:
#Mail to Comcast is queued and I see RL000001 in my mail logs. What does this mean?
#It seems that Comcast has added some rate limiting based on your SenderScore (https://www.senderscore.org/).
#As such, The following configuration can be used (in conjunction with max-msg-per-connection and max-smtp-out from above), changing the rate based on your score and the data from Comcast's site:
#
<domain comcast.net>
max-msg-rate 3600/h
</domain>
#
postmaster  mrwangfei@163.com
#user name
<smtp-user sales>
password test
source {auth1}
</smtp-user>

<source {smtpuser-auth}>
     smtp-service yes
     always-allow-relaying yes
     require-auth true
     process-x-virtual-mta yes
     default-virtual-mta vmta1
     remove-received-headers true
     add-received-header false
     hide-message-source true
    #    pattern-list patterns
</source>
################
#config domainkeys and IP
################
host-name    ionfgs.cn

<virtual-mta-pool pond>
   virtual-mta vmta1
</virtual-mta-pool> 
<virtual-mta vmta1>
        smtp-source-host     10.2.165.12  server1.ionfgs.cn 
	domain-key mail,*,/etc/pmta/mail.ionfgs.cn.pem
</virtual-mta>

smtp-port 2525
#EOF